The table below shows your measurement results (in hundreds of a milimeter)
Taken at ____________ km.
| Valve | Blade insertion | Actual gap | Allowed gap | Comment |
| I1L | 13 .. 19 | |||
| I1R | 13 .. 19 | |||
| I2L | 13 .. 19 | |||
| I2R | 13 .. 19 | |||
| I3L | 13 .. 19 | |||
| I3R | 13 .. 19 | |||
| I4L | 13 .. 19 | |||
| I4R | 13 .. 19 | |||
| I1L | 29 .. 35 | |||
| E1R | 29 .. 35 | |||
| E2L | 29 .. 35 | |||
| E2R | 29 .. 35 | |||
| E3L | 29 .. 35 | |||
| E3R | 29 .. 35 | |||
| E4L | 29 .. 35 | |||
| E4R | 29 .. 35 |
Nomenclature:
| "+++" | low pressure to insert | add 2 to blade thickness |
| "++" | normal pressure to insert | use blade thickness |
| "+" | high pressure to insert | subtract 2 from blade thickness |
| "-" | can not be inserted |
© Copyright 2009 FireBladerDk - Last updated 2009-08-03